Excavator use Juxiang S350 Sheet Pile Vibro Hammer
S350 Vibro Hammer Product parameters
| Parameter | Unit | Data |
| Vibration Frequency | Rpm | 3000 |
| Eccentricity Moment Torque | N.M | 36 |
| Rated excitation force | KN | 360 |
| Hydraulic system pressure | MPa | 32 |
| Hydraulic system flow rating | Lpm | 250 |
| Max Oil Flow of Hydraulic System | Lpm | 290 |
| Maximum pile length | M | 6-9 |
| The auxiliary arm weight | Kg | 800 |
| Total Weight | Kg | 1750 |
| Suitable Excavator | Tons | 18-25 |
Product advantages
1. Suitable for small excavators weighing around 20 tons, reducing the threshold and cost of pile driving operations.
2. The control valve block is installed at the front, simplifying the installation process.
3. The electric control mode minimizes energy consumption, ensures precise movements, and offers swift responsiveness.
Design advantage
Advanced equipment and processes guarantee the dimensional precision of each Vibro Hammer within 0.001mm, establishing a technological lead of two generations over domestic counterparts.
product display
Applications
Our product is suitable for excavators of various brands and we have established long-term and stable partnerships with some well-known brands.
Suitable for Excavator: Caterpillar, Komatsu, Hitachi, Volvo, JCB, Kobelco, Doosan, Hyundai, Sany, XCMG, LiuGong, Zoomlion, Lovol, Dooxin, Terex, Case, Bobcat, Yanmar, Takeuchi, Atlas Copco, John Deere, Sumitomo, Liebherr, Wacker Neuson
About Juxiang
| Accessoryname | Warrantyperiod | Warranty Range | |
| Motor | 12 months | We offer a complimentary replacement service for fractured casings and damaged output shafts within a 12-month period. However, instances of oil leakage beyond a 3-month span are excluded from the coverage. In such cases, the procurement of the necessary oil seal shall be the responsibility of the claimant. | |
| Eccentricironassembly | 12 months | The rolling element and the track stuck and corroded are not covered by the claim because the lubricating oil is not filled according to the specified time, the oil seal replacement time is exceeded, and the regular maintenance is poor. | |
| ShellAssembly | 12 months | Damages caused by non-compliance with operating practices,and breaks caused by reinforce without the consent of our company,are not within the scope of claims.If Steel plate cracks within 12 months,the company will change the breaking parts;If Weld bead cracks，please weld by yourself.If you are not capable to weld,the company could weld for free,but no other expenses. | |
| Bearing | 12 months | The damage caused by poor regular maintenance, wrong operation, failure to add or replace gear oil as required or is not within the scope of claim. | |
| CylinderAssembly | 12 months | If the cylinder barrel is cracked or the cylinder rod is broken, the new component will be replaced free of charge. The oil leakage occurring within 3 months is not within the scope of claims, and the oil seal must be purchased by yourself. | |
| Solenoid Valve/throttle /check valve /flood valve | 12 months | The coil short-circuited due to external impact and the incorrect positive and negative connection is not in the scope of claim. | |
| Wiring harness | 12 months | The short circuit caused by external force extrusion, tearing, burning and wrong wire connection is not within the scope of claim settlement. | |
| Pipeline | 6 months | Damage caused by improper maintenance, external force collision, and excessive adjustment of the relief valve is not within the scope of claims. | |
| Bolts, foot switches, handles, connecting rods, fixed teeth, movable teeth and pin shafts are not guaranteed; The damage of parts caused by failure to use the company’s pipeline or failure to comply with the pipeline requirements provided by the company is not within the scope of claim settlement. | |||
**Guidelines for Pile Driver Maintenance and Usage**
1. During pile driver installation on an excavator, remember to replace the hydraulic oil and filters after testing. This guarantees smooth operation of both systems. Any contaminants can harm the hydraulic system, causing malfunctions and reducing lifespan. **Note:** Pile drivers demand top performance from the excavator’s hydraulic system. Inspect and service it thoroughly before installation.
2. New pile drivers need a bedding-in period. In the first week of use, change gear oil every half to a full day’s work, then every 3 days. That’s three gear oil changes within a week. After this, follow regular maintenance based on working hours. Change gear oil every 200 working hours (but not exceeding 500 hours). Adjust this frequency as needed. Clean the magnet each oil change. **Note:** Maintenance intervals should not exceed 6 months.
3. The internal magnet primarily serves as a filter. Pile driving produces iron particles due to friction. The magnet keeps the oil clean by attracting these particles, thus minimizing wear. Regularly cleaning the magnet is vital, about every 100 working hours, adjusting based on workload.
4. Before starting each day, warm up the machine for 10-15 minutes. When the machine is idle, oil settles at the bottom. Starting it means the upper parts lack lubrication initially. After about 30 seconds, the oil pump circulates oil to where it’s needed. This minimizes wear on parts like pistons, rods, and shafts. While warming up, inspect screws and bolts, or apply grease for proper lubrication.
5. When driving piles, apply moderate force initially. Greater resistance requires more patience. Gradually drive the pile in. If the first vibration level is effective, there’s no rush for the second level. Understand that while quicker, excessive vibration accelerates wear. Regardless of using the first or second level, if pile advancement is sluggish, pull it out by 1 to 2 meters. Leveraging the pile driver and excavator’s power facilitates deeper piling.
6. After pile driving, allow a 5-second pause before releasing the grip. This reduces strain on the clamp and other components. Releasing the pedal after pile driving, due to inertia, maintains tightness among components, reducing wear. The optimal moment to release the grip is when the pile driver stops vibrating.
7. The rotating motor is intended for pile installation and removal, not correcting pile positions due to resistance or twisting. The combined impact of resistance and pile driver vibrations can damage the motor over time.
8. Reversing the motor during over-rotation stresses it, potentially causing harm. Allow a 1 to 2-second interval between motor reversals to prevent strain and prolong the motor’s and its parts’ longevity.
9. While operating, be vigilant for irregularities like unusual oil pipe shaking, elevated temperatures, or odd sounds. If any issue arises, halt operations immediately for assessment. Addressing minor concerns can avert major complications.
10. Overlooking minor issues can lead to significant problems. Nurturing equipment not only curbs damage but also reduces expenses and delays.
